click to view home page

Locomotives  |  Rolling Stock   |  Machine Shop Equipment  |  Full Scale Railroad Items  |  Non Railroad Steam Items  |  Text Only Ads / Wanted Ads

To receive email alerts on new items like this,
join the DLS "For Sale"
MAILING LIST

 

 

The Lady Eyre

  SOLD 
 

    
click images

 

53" LOA x 13" Beam FRP Hull - Wood deck and trim.  Stuart D-10 with boiler feed pump.  Horizontal wood lagged boiler, propane fired with a Bill Ford boiler monitor/control system.  Channel 83 FM Rx with 3 servos and NiCads. No charger. No Tx.  Controls Rudder, throttle and FWD/REV.  Asking $3,500 plus UPS packing and shipping from Reno, NV.

  SOLD 

 

 


 

Steam Powered Saito Chiba Star Tug
 SOLD

 
click images

45" LOA x 11" Beam. FRP Hull.  Saito T2GR Engine and Saito Boiler w/ dual alcohol burner.  Channel 83 FM Rx w/ 4 servos and NiCads. No Charger. No Tx. Controls rudder, throttle, FWD/REV and whistle. Asking $3250 plus UPS packing and shipping from Reno, NV.  Needs touch-up and cleaning. Reason for selling - Haven't run in years.   SOLD


7.5" ga. Ready To Run CRAB Locomotive & Tender

  SOLD 

 

 

 

STARTER STEAM ENGINE

Ready To Run CRAB Locomotive and tender. 7.5" ga.

Loco is 14" wide by 22" long. Two cylinder double acting engine with a bore and stroke of 1.375"x2.5". Slip eccentric valve gear, mechanical lubricator and crosshead driven feed pump. Vertical fire tube boiler is 9" in diameter and 14" tall, propane fired with 8 individual burners in a ring. Burner control on the tender along with the pilot light control. Boiler feed is by a crosshead driven pump with a hand pump for back-up. Tender has manual brakes and is 16" wide by 5 feet long. Holds about 12 gallons of water and a 5 gallon propane tank. Newly painted.

Engine and tender are located in the Reno, NV area.  Pick-up recommended. Will ship for cost without the propane tank. Asking $3,500 or your best offer. Contact Bill Cody for additional information/pictures.  Contact Bill Cody for additional information/pictures using the form below.

  SOLD 


1.5" scale, 7.5" ga. CLISHAY Loco & Tender

  SOLD 

  

 

BE ON THE TRACK WITH STEAM FOR ONLY  $5,750

1.5" scale - 7.5" gauge CLISHAY Locomotive tender - Ready To Run.  Engine is a two cylinder double acting with a bore and stroke of 1.25" x 1.5".  Boiler upgraded from the original 8" diameter water tube to a steel 10" diameter propane fired fire tube boiler with 73 1/2" copper fire tubes.  Pneumatic FWD/REV shift and brakes on locomotive, controls and air compressor on tender.  Usual accessories: working headlight, bell, new whistle, two new relief valves, engine driven feed pump and a hand pump. New body and trucks on tender.  Locomotive and tender are located in Elko, NV. Recommend pick-up but will ship for cost without the battery and propane tank.  Asking $6,500 or best offer.

NOW $5,750.  Delivery available after purchase for $1.25/mile (in advance please).

  SOLD 

 

 

Locomotives  |  Rolling Stock   |  Machine Shop Equipment  |  Full Scale Railroad Items  |  Non Railroad Steam Items  |  Text Only Ads / Wanted Ads