Aluminum "Grand Scale" Gondola Passenger Cars
New all aluminum grand scale gondola passenger cars. 4"
aluminum 6061 t6 frame. 2x2 x1/4 6061 angle crossmembers. Body all 5052
marine grade .125 sides, floor & seats. Bolster & pin installed, with
rollers. Complete less trucks. 16' long 38" wide 23" high sides,
seating for 18. Weight less trucks 550lb. Designed for mountain &
hilly RR's where weight is a factor on grades. introductory
price........$6950
use form on bottom of page to request more info
|
16" gauge Gondolas (3)
Reduced to $3500
(3) 16" gauge gondolas 2 are matching 10' long 4 wheel trucks 1
is approx. 8' long & single wheel trucks, $5000
$3500
for all 3 sold as a lot only.
use form on bottom of page to request more info
|
|
7.5" gauge panel track
SOLD
49 pieces 10' long 7.5" gauge panel track......36 straight sections 10' long
13 curved sections 10' long...... Made with 3/8 x 1" bar stock, has male &
female ends to interlock each section together, tie clips are welded on with
hole for screws. Sold as lot only $2000 located in Cincinnati Ohio.
|
|
24" ga. 0-6-0 steam
outline tank style engine
Reduced to
$10,000
  
For sale 0-6-0 24" gauge steam outline tank style engine. This is a project
loco that was started by custom locomotive in Chicago. It will make a super
locomotive, it has a CNC 1 1/4" flame burnt frame , 24" dia 4140 cast steel
wheels, cow catcher is done, cab is done, boiler is rolled , needs engine,
hydraulics, wiring & paint to be done.......price as shown $15,000 $10,000
.......what you see is what you get
Located Cincinnati Ohio.
use form on bottom of page to request more
info |
|
San Francisco Trolley Cars
Reduced to $3000
Unfinished 16" gauge San Francisco trolley cars Chassis finished all
woodwork is done needs Engine & clutch & stain to finish 2 available $5000 $3000 each.
use form on bottom of page to request more
info
|
|
16" ga. F7 Diesel Locomotive
Unfinished 16" gauge F7 diesel locomotive "a " unit Power
trucks, just needs hydraulic motors, and needs engine & hydraulic pump (these
are bodies with trucks only). Very highly detailed $15,000 each (2 available).
use form on bottom of page to request more
info
|
|
G-16 Wheels
Used Original G16 Wheels Decent Shape $50 Each, Used G16 Axles $50 Each
use form on bottom of page to request more info
|
|
Large Scale Bolsters
Large Scale Bolsters, With Rollers & Center Mount Installed, New, But
Slightly Rusty $100 Each
use form on bottom of page to request more info
|
|
Large Scale Side Frames
use form on bottom of page to request more info |
|
Journal Boxes
Journal boxes for above side frames...machined ready for bearings, no covers
$50 each
use form on bottom of page to request more info |
|
15"
ga. ALCO PA Fiberglass Nose
click image
ALCO PA Fiberglass Nose Santa Fe
Colors for 15" gauge or larger. $750
use form on bottom
of page to request more info
|
|
G16
Fiberglass Nose
click image
G16 Fiberglass Nose for 15" gauge or
larger.
(WOULD ALSO MAKE A GREAT WALL MOUNT TRAIN NOSE FOR A TRAIN ROOM)
$500
use form on bottom
of page to request more info
|
|
MTC
Signals
click image
Miniature Train Company Crossing
Signals
Prices upon request.
use form on bottom
of page to request more info
|
|
Rail
Bender
click image
Aldon #5 Screw type rail bender.
VERY NICE. For 8 to 16 LB rail $400
use form on bottom
of page to request more info
|
|
15"
gauge Coach Frames and Trucks
SOLD
click images
2 (two) 12' x 28" side entrance
coach frames (new) with 15" gauge trucks, air brakes on all trucks (trucks are
new). $3500
SOLD
|
|
Large
Scale Caboose
SOLD
click images
Extremely nicely
detailed caboose. 24" side by 9' long. Ride in type. Trucks
not included. Caboose suitable for 12" gauge or larger. $7500. SOLD
Still
Available: Unfinished caboose (like above).
Only $2500 (no trucks)
|
|
Info
Request Form
|
