Stuff you missed Sold page

Suppliers use Market Place ADs

Send in your Buy n Sell AD

Send in your Wanted AD

Would you like to be automatically alerted when a new item is added?  Just submit your address to our live steam and diesel "Buy n Sell" mailing list.

switch stand | marker lite | headlight | seats | bell | lantern | switcher bell  |
locomotive bell | bell | speeders | 3 whistles | whistles | whistle | whistle | horn2

Switch Stand
  SALE PENDING 

Switch Stand off of the Cotton Belt RR for sale. $160.00 obo. All it needs is a  few cans of spray paint, & a new home. Moving & can't take it with my, wife says it has to go. You pick up, can deliver in a approx 100 mile radius of Pine Bluff, AR. if you pay for the gas. Darrel Cason 870/536/1229 home, 870/718/4497 cell.  SALE PENDING 

Switch Stand Marker Lite

Stand Marker Lite for sale, $225.00 Lite is complete except fot the little short glass chimmlie. In pretty good shape, one of the green day targets damaged a little, see pictures. Buyer pays only actual shipping cost. Darrel Cason 2215 Richmond Dr. Pine Bluff AR. 71603  870/536/1229 or 870/718/4497

Steam Locomotive Head Lite

Steam Locomotive Head Lite for sale, $550.00 Has a good reflector, not cracked or broke. In pretty good shape, just missing the original glass number boards. Wired for 110 volts, but can be changed bact to 32 volts easily. A great headlite for the money. Probably came of either the Cotton Belt, MoPac, or Rock Island. You pay only the actual shipping cost, or pick up. Darrel Cason 2215 Richmond Dr. Pine Bluff, AR. 71603  870/536/1229 home, 870/718/4497

Brass Steam Whistles

Whistle 1

Whistle 2


Whistle 3

(Whistle 1) 3 1/2" diameter X 11" tall - in excellent condition - asking $380

(Whistle 2) Morrison 3 1/2" X 17" tall - in excellent condition - asking $520

(Whistle 3) Morrison 3-whistle chime, all 3 1/2 inch diameter, see photo. Has a 1" Lunkenheimer valve on wood pedestal. Weight 30 pounds - asking $1180

Items can be viewed by appointment in Fredericktown Ohio.  James Leasure Use this form to contact me.

Seven Engineer & Conductor Seats

I have multiple styles, all originated form various locomotives and all are in various conditions.

3 – Switcher/Road Locomotive Circular with Arm Rests (red seat)

1 – Switcher Style with no arm rests

3 – Road Locomotive type seats (Green Mixed)

All are in various conditions (some needing upholstery) and would make great riding car seats utilizing a 2-¼” OD king pin for mounting into a 2-¼” ID pipe or socket.

I am asking $60.00 per seat un-reupholstered (add $150 each for reupholstering) plus shipping via LTL or you pick up.. 

Contact Jon Jaros
Euclid, Ohio
440-478-8009
 

Bell with Pneumatic Ringer

  Reduced to $1050 

This bell is 17 inches in diameter at the throat, with a 12-inch diameter, two bolt, flat mounted cradle. . It has a horizontal style pneumatic ringer as well as a crank and rocking yoke. The trunnions are free and well lubricated as is the ringer, which operates nicely on about 100 psi.

Other than the usual casting numbers there are no markings anywhere….inside or out.

The bell is located in mid-coast Maine (Jefferson). $1500.  $1050  Email or call Scott at 207 446 3918

5 Note Air Horn

click

Full Size Leslie RS5T horn set originally mounted on a diesel locomotive.   Obviously used but in very good condition, the paint appears to be original.  All diaphragms are good and the horns sound beautiful.  These are the loudest I have ever heard -- ear protection is a must.  Horn bell numbers 25, 31, 37, 44, and 55.  Bought from a railroad employee's estate,  they were hanging on the wall of his workshop.

Local pick up in Colorado Springs, Colorado  OR buyer pays all shipping costs. We can talk about how best to ship them. $750.00 or offer. E-mail with any questions.

 

Brass Switch Engine Bell

Brass switch engine bell from the 1850's era.  Call Frank @ 615-542-5800 for more details

For Sale
An Entire Whistle Collection
(over 20 antique whistles)

Click Here for details.

Switch Engine Bell

click images

 

Brass Bell weighs 60 pounds and is 12” in diameter and 14” tall.   It is rung by air power. It is located at Maricopa Live Steamers in Phoenix, Arizona. The price is $700.00, Please let me know if you need more information.
 

Please send me additional information. I am interested in this item... Your email address Your phone number (optional) Your message to the seller

Locomotive's Bell

The bell is from one of the last DL&WRR steam locomotives. I can furnish the serial number upon request. At this time, the price is open. It is quite heavy (over 150 lbs) so if I were to ship it, I would have to make a special skid and ship it via freight. $1,750.  Located in Tennessee. Please advise if you need any more information.

 

Pacific Electric Air Horn

Pacific Electric Air Horn, $500. Seller pays UPS ground shipping CONUS. This is a full-size replica, fully functional, with valve and air-line QD fitting. It looks and sounds great! Originally purchased at Orange Empire RR Museum in Perris, CA. Horn is 1.5 inches diameter by 19 inches long. With valve & fittings as shown total length is 26 inches. Contact Bill Unglaube in Phoenix, AZ at 623-772-6025. Please call after 8 PM local time.

Switch Pole Target & Oil Lamp

Full scale Adlake railroad switch pole target and oil lamp~from the GM&O railroad~$800.00   Springfield IL

 Speeder

Kalamazoo 56A motorcar and trailer. Ex C&O car, has a Onan CK-S 10 hp engine, 2 speed Fairmont trans., with Fairmont 16 " low mileage pressed steel wheels. This is an open car with custom removable top and side curtains and lexan windshield. New battery and rebuilt starter, seats 4, equipped with seat belts, good brakes with a spare set of pads. NARCOA compliant. I just returned from a run on the Iowa River Railroad, and car performed beautifully. Trailer is included,  has good tires with a spare, and is equipped with a hand winch and tilt bed for ease of loading. Trails very easily on the highway, as there is very little wind resistance. This car is ready to go for the next excursion. Asking $3950. Call at 715-216-3064, or email me using the form below. More pics on request. Car is located in Wisconsin, near LaCrosse.

Please send me additional information. I am interested in this item... Your email address Your phone number (optional) Your message to the seller

Two Speeders

FOR SALE in Kentucky   -

2 SP Motorcars For Sale

• 1 Fairmont A-3-A-2

• 1 M-9-G-2

$2500 Or Best Offer.  Will trade for 1.5 scale 7-1/2 gauge equipment.
Cars are disassembled but nearly complete. As is, Where is. Not able to ship

3 Chime Loco Whistle

Shaeffer and Budenberg 3 chime locomotive whistle with built in valve.. whistle sounds great and valve does not leak.. Whistle is 6" inches in diameter...Very rare whistle as the company was out of business by 1919..$1500 firm.. Call 1-304-367-1765

Replica Southern steam whistle
Built by MD Whistles

Replica Southern steam whistle
Built by MD Whistles

Whistle is a 3 chime top lever valve whistle with exact sounds that of the famous Southern Railway. Can operate on air or steam.. Air requirements are 75-100 gallon tank with at least a 1" inch air line.. Whistle is new..$490 plus shipping.. contact Mike 1-304-367-1765

Headlight from a real steam engine
 REDUCED

Full size, 1:1 Scale Head light from steam engine. Its original roots unknown, but did come from the Chicagoland area. It is made from The Pyle National Company, Chicago Illinois. Aluminum, Model Type # 20C155. It’s old; one side door hasp broke, but doesn’t affect the appearance. Glass is all intact; however there are some small age spots on the bottom of the main reflector. Seen these go very high at the auction houses, but we need to help Jim out.

USA – 48 States only. Prefer local pick-up, or will meet in 150 Mile radius from Rockford Ill. I will consider shipping at buyers cost.   $1100.00 $975.00 or best offer (or will trade for 1.5 scale 7 1/2 gauge equipment.

5 Chime Horn from a real diesel locomotive
 SOLD

Full size, 1:1 Scale; Leslie Supertyfon 5 chime horn. Obtained “legally” from a BN – GE c30 unit being scrapped in western Illinois. Obviously used, but good condition. At the base for the mounting bolts, there are a couple little cut marks from the torch, but doesn’t affect the base or the horn. Horn #’s 25/37/44/31/55.

USA – 48 States only. Prefer local pick-up, or will meet in 150 Mile radius from Rockford Ill. I will consider shipping at buyers cost. $1350  $990.00 or best offer (or will trade for 1.5 scale 7 1/2 gauge equipment.

 SOLD

Solid Nickel Steam Locomotive Bell

 SOLD

Rare solid Nickel Steam Locomotive Bell. I was told by the old engineer that I got it from, that it was made during the first world war. Brass was too scarce, so they made some out of Nickel. He worked for the MoPac. Was made before air ringers. Good tone, & condition. Lower dia of the bell is around 12 3/4 in. Bell is 10 in tall. Cradle is approx 24in hi, base is approx 7in. Very heavy, 150 lbs or more. Can be seen at the Ark. RR Museum Pine Bluff, AR. A very rare prize. $1,250. Or will trade for 1.5 scale 7 1/2 gauge cars. Darrel Cason Pine Bluff, Arkansas 71603.  

 SOLD

Send in your Full Scale railroad items today. 
We will accept ads for memorabilia, artifacts, full scale cabooses and other rolling stock.

 

Here are the terms:  If item sells AND ONLY if it sells via this web site, we kindly request a commission of 2% (two percent) of the sale price. Minimum commission is $20. We understand this is far less that the required commission of those auction houses (Am I allowed to say ebay?), but our results are excellent and our costs are very low. I offer and charge for this service to generate some cash to try to offset my expenses in operating this web site.  We can not accept ads for stolen railroad property.  Please contact the railroad police if you have stolen property.  

If you agree to these terms, email the text of your ad to: 4 s a l e @ d i s c o v e r l i v e s t e a m . c o m 
and please attach your photos.

back to the "Buy n Sell" page