click images to enlarge

2" scale 7.5" gauge (works well with 1.5" - 2.5" equipment) Flat car with removable riding bench. Has working mechanical brakes on one truck. A well built car made in 1995 using GGLS style trucks & couplers. $800.00 Or Best Offer! 

 

Wooden Hopper Car
 SOLD

 
click images to enlarge

2.5" scale 7.5" gauge wooden hopper car. 20" wide X 48" long. Working hatch. Plum Cove Truck Frames with 5" dia. wheel sets. RMI 1.5" scale couplers. Nice solid car. $650.00  

Steam Water Pump
 SOLD

click to enlarge

1.5" scale Van Brocklin steam water pump. Serial #134. Just taken off of working locomotive. Comes with a new Locoparts displacement lubricator. Also included is a 4 pint horizontal injector from Macc Models. All 3 pieces $550.00  

Injector
 SOLD

click to enlarge

The injector is rated up to 4 pints and has 1/4" copper already on it with one end set up for 1/8" pipe.  This is a good little injector. Used only one time. $50.00 

Railtruck Project
 SOLD

click images to enlarge

2.5" scale 7.5" gauge Railtruck project. New 2.5hp Honda with a F-N-R transmission to a gearbox. This railtruck is about 40% complete and most of the parts are included to finish the drivetrain. You finish and have the fun. $1000.00 

Don the railtruck is about 40% complete and most of the parts are
included to finish the drivetrain.
Located in Northern California near San Fran.

Skidmount Steam Fire Pump
 SOLD

click images to enlarge

3.75" scale freelance skidmount steam fire pump. Vertical boiler built in 2004 just hydro-tested in April. Operates at 100psi. Propane fired. Detroit Hydrostatic Lubricator and Marsh Pump feeds the hose reel. Use the pump to inject water in the boiler.  4 chime Kinsley whistle. Needs a new glass in steam gauge. Looks good on a flatcar! For another image click photo . $3500.00 

Davenport Loco Project
 SOLD

click images to enlarge

3" scale 7.5" gauge Davenport loco project. Dual 1/2 P/M motors with brakes connected to 5:1 gear reduction boxes. 4QD 24 volt control system. Have Gel Cell Deep Cycle batteries included. You finish the installation of electronics, paint, and other misc. details. This is not a D&RGW #50 as the hood is higher. Very well built and heavy. $4,000 $2,850 firm  

Cab Frame, Saddle Tank, Tender Shell & Fuel Tank
 SOLD

click images

Cab frame, saddle tank & tender shell with fuel tank for a 3" scale locomotive. $400.00 

 

Wheel / Axle Sets
 SOLD

click image

1.5" scale 7.5" gauge wheel & axle sets. Unused. $150  Use the form below to request more information.